Heavy-Duty Ground Protection Mat

Built for loaded plant

The heavy-duty ground protection mat is the thicker, denser answer for loaded trucks, dozers, and excavators — the machines that make a standard mat flex too far and dig in at the edges. A 5/8–3/4 in section and a higher-mass HDPE body resist punch-through under tracked plant, so the mat keeps spreading load instead of folding into the rut it is meant to prevent — matching it to traffic is covered in choosing mat thickness and tread for your traffic.

Tread that bites wet clay

A deeper diamond tread is the difference on greasy ground. Spinning wheels and steel tracks find grip on the moulded pattern rather than polishing a smooth sheet, which matters on the wet clay and churned mud where heavy machines actually work. The pattern runs both faces, so the mat is reversible when one side wears.

Connecting into a haul road

Steel hand-holes let you bolt mats edge to edge into a continuous roadway that will not creep apart under rolling loads. For a truck haul route or a crane walking path you lay a connected run; the locked joints stop individual mats hopping or pumping mud to the surface.

Sizing to the machine

Rate the mat by the heaviest point load it will see, not the average. The quoted figures — up to ~120 t spread and ~600 psi point — assume prepared, level ground. Over genuinely soft or saturated soil, step up to the extra-heavy track mat, which floats crawler plant on a far larger footprint; for lighter access a standard ground protection mat is enough.